new balance shoesasics running shoesmulberry handbagsnew balancetory burch saleonitsuka tiger saleLouboutin Saledesigner bagsprada handbagstory burch shoesLouis Vuitton Outlet
Every Knee Shall Bow

Installation Tools Needed

Paper towels, glass cleaner, masking tape, and a stiff object, such as a credit card or drivers license.


Clean the glass surface thoroughly with glass cleaner or surface cleaner. 

Make sure the surface is dirt, dust and lint free. Allow the window surface to become completely dry.
Squeegee Tool.

Use papertowel for smooth application.


Postition the decal on window and temporarily tape it with masking tape. Step away from the window and check your alignment of the decal.  Re-postition the decal as needed. When you are satisfied with the positioning, place a piece of masking tape across the top of the decal. The tape should be long enough to completely secure the top edges of the decal to the glass, going past the edges by an inch or so.


Release liner from decal.  Hold Liner away from decal as shown.

Prepare to squegee decal.

Squegee decal from Left to Right, starting at the top, hold bottom secure.

Continue squegee process downward.
Continue the Process until the decal is applied.
Remove the Masking Tape.
Application Complete!

The Completed Process!


Page Content/Graphics Copyright ©
Every Knee Shall Bow & Something Unique Designs, LLC 2000 - 2002
All Rights Reserved
This site is best viewed 800 x 600 resolution with Internet Explorer